are you loading the upper sounds as you need to load both to get a full keyboard worth of sounds clicking noise can be the filters being opened by the...
Pete, Check the connector cable end on the main board as well as the keyboard. Also, try adjustment of the pot on the motherboard, this revived a mirage for me...
Yeah, I think it might be a load error. I was playing around with it, and was checking out the discs I had and found one where the upper half works. It isn't...
Try a small adjustment of the pot on the main board. It sounds like what I was experiencing. Some disks would seem to work in the upper region but the sound...
I had some trouple finding the pot, but I think I found it now. Is it a flat thing with a slat in it so that it can be twisted with a small screwdriver? If...
Pete, Looks like you found it. With my problem adjusting the pot 'revealed' the sound in the upper 2 octaves of the keyboard. One way it was just clicks, as I...
Yeah, it was worth a try, thanks alot. I'm sure I'll have to adjust it once I figure out what exactly is wrong with the unit though. I've since found a patch...
an atari st drive will work or any drive that conforms to the shugart standard ds0 and ry on pin 34 ... From: mrmitas To: Mirage-Net@yahoogroups.com Sent:...
how do i save my parameters n how do i bring in new sounds of the net without my dikettes being formatted to my mirage,,n how do i ,or can i format my...
48 mirage floppy disks for sale originals disk #101 disk #102 disk #13 disk #5.2 disk #formatting disk disk #masos then there are 42 personal sampled disks...
The first things you need to figure out is whether you are going to buy hardware, such as the Akai MPC 300, or you are going to use your Windows or Apple PC....
On Sat, 2009-10-31 at 16:40 +0000, ytwjtdrcyire wrote: <snip> Stolen content, link to a ad-loaded site that wants you to sign up for a course... Looks like we...
yes its a spammer it was also on the alpha juno group aswell ... From: Gordon JC Pearce To: Mirage-Net@yahoogroups.com Sent: Saturday, October 31, 2009 7:06 PM...
I think Gordon was worried another copyright storm might break out. Not to worry - it worked out OK. -Johnny (Sigh - I seem to have lost my ability to reply by...
i have qty: 2 ensoniq mirages- and they are both malfunctioning- one of them reads the discs correctly- but the output level is barely audible- the other one...
PuffTUBE@...
Nov 4, 2009 11:17 pm
6706
... For the one with poor audio, check the output of each filter IC. If it's not there, check the filter input. If you still don't have it, check the 4051...
Hi Scott, Not sure how technical you are; you may have already thought about these things. Here are some general areas to consider: If you have 2 units, you...
Compressed air?... Avoid air hoses used in service stations, machine shop or any kind of factory that use compressed air to activate powered tools. Those...
My drive was malfunctioning a few years ago and all it took was some TLC. All I did was to remove the drive from unit and with something like a long Q-tip, I...
That's safe! But it does not remove magnetic particles that have maybe tricked to the heads and there is almost certainly some... Air is good to clean dry...
That I didn;t know. ... From: Christian Forget <ccf@...> Subject: Re: [Mirage-Net] malfunctioning issues To: Mirage-Net@yahoogroups.com Date: Friday,...